Overview
The best low-budget solution for tight space production. This lead-free wave solder machine includes a titanium fingers
conveyor resistant to high temperatures. The solder pot is also made of titanium. Cast iron heater for the solder pot, mounted
outside of the solder pot. This new assembly design prolongs the life of the solder pot
- Large production requirement in the range of 1200-2200pcs/8hours (Take 300x300 PCB as reference)
- Sprayer droved by stepper motor and rail/slider guilding rail
- Dual wave solder. Both wave heights are controlled by transducer via touch screen. Changing the wave height via adjusting the frequency of power
Main Features
- Traditional panel control. Adopted brand temperature controller, counter, timer and speed controller etc. All these parts provide a stable performance of the machine.
- High precision sprayer made in Japan, provides perfect atomization performance of the flux.
- Sprayer droved by German air cylinder, small noise and long life warranty
- Forced air convection preheat zone control by temperature controller in PID model. The preheat zone will provide enough uniform heat for the PCB
- Adopt cast iron heater for the solder pot, it’s mounted outside the solder pot. This new assembling way will prolong the life of the solder pot
- Dual wave solder. Both wave heights are controlled by transducer. Changing the wave height via adjusting the frequency of power
- Solder pot is made of SUS316 (standard). Meanwhile we provide Ti material for option
- Customer can set on and off time of machine weekly
- Light and Sound alarm for overheating and emergency stop
- The conveyor system is equipped with overload protection
Specs
| PBC width | 1.18-15.75in-30-400 mm |
| Pot Volume | 859.8 lbs (245Kg) |
| General Power | 10KW |
| Running Power | 2-5KW |
| Machine Dimension | 123.62(L)49.21(W)62.99(H)
3050(L)-1160(W)-1360(H) |
| Net Weight | 1,653.46Lbs (400Kgs) |
| Controlling System | Touch Screen + PLC control |
| Conveyor Motor | 3Ph-380V-60W |
| Conveyor Speed | 200MM-1500MM/Min |
| Flux Volume | 6.5 Liters |
| Alcohol Volume | 4.5 Liters |
| PCB Direction | Left to Right |
| Spray Drive | Stepper motor drive fluxer with rail and slider |
| Sprayer | ST-6 Made in Japan |
| Preheat | 1 Hot air convection |
| Preheat Power | 4 KW |
| Solder Pot Material | Titanium |
| Solder Pot Heater | Cast Iron Heaters |
| Solder Pot Power | 1.2KW*10PCS |
| Wave Number | Dual Waves |
| Wave Type | Turbulent first wave, Lambda second wave |
| Time for Solder Melt | 60 minutes |
| Solder Pot Lift (Up/Down) | Manual |
| Solder Pot In/Out | Automatically |
| Conveyor Type | Titanium finger |
| Fixed Rail | Front Rail |
| Movable Rail | Rear Rail |
| Solder Angle | 3-6° |
| Air Supply | 3-5 BAR |
| Power Supply | 3PH 220V 60HZ OR 3PH 380V 50HZ OR 3PH 440V 60HZ |